Technical Services Standard Details
The following Technical Services Standard Details have been provided to assist in the preparation of documentation for Civil Engineering works within the City of Onkaparinga.
- It is the responsibility of the individual to ensure that they are using the current version of these drawings. The City of Onkaparinga accepts no liability for issues arising from the use of superseded drawings.
- These drawings may not suit all applications. Any proposed alterations to these drawings should be referred to the City of Onkaparinga for approval.
- Any inconsistencies or omissions in these drawings should be brought to the attention of the City of Onkaparinga for clarification or amendment.
- Electronic versions of these drawings are available for viewing or download below in PDF format.
- Printed copies of these drawings are uncontrolled.
- For further information contact the City of Onkaparinga at mail@onkaparinga.sa.gov.au or phone (08) 8384 0666.
To download a PDF version for viewing or printing click on the relevant link below:
stormwater management design guide(PDF, 661KB)
Technical Service Standard Details - full details(PDF, 1MB)
Typical kerbing profiles (100 series)
| DWG# |
Drawing title |
Rev |
Date |
| SD‑100 |
100 UPRIGHT KERB & GUTTER — INFALL TYPE (100 K&G)(PDF, 68KB) |
B |
AUG 12 |
| SD‑101 |
150 UPRIGHT KERB & GUTTER — INFALL TYPE (150 K&G)(PDF, 69KB) |
B |
AUG 12 |
| SD‑102 |
100 UPRIGHT KERB & TRAY — OUTFALL TYPE (100 K&T)(PDF, 69KB) |
B |
AUG 12 |
| SD‑103 |
150 UPRIGHT KERB & TRAY — OUTFALL TYPE (150 K&T)(PDF, 69KB) |
B |
AUG 12 |
| SD‑104 |
SPOON DRAIN - RESIDENTIAL & INDUSTRIAL (SD)(PDF, 67KB) |
B |
AUG 12 |
| SD‑105 |
DRIVEWAY INVERT — INFALL TYPE — RESIDENTIAL & INDUSTRIAL (INV)(PDF, 106KB) |
C |
AUG 12 |
| SD‑106 |
DRIVEWAY INVERT — OUTFALL TYPE — RESIDENTIAL & INDUSTRIAL (INV)(PDF, 106KB) |
C |
AUG 12 |
| SD‑107 |
100 BARRIER KERB — (100 K)(PDF, 66KB) |
B |
AUG 12 |
| SD‑108 |
150 BARRIER KERB — (150 K)(PDF, 67KB) |
B |
AUG 12 |
| SD‑109 |
EDGE BEAM — (EB)(PDF, 66KB) |
B |
AUG 12 |
| SD‑110 |
KEYED-IN KERB — FOR MEDIANS (MED) OR ROUNDABOUTS (RAB)(PDF, 67KB) |
C |
AUG 12 |
| SD‑111 |
SIT-ON KERB — (SOK)(PDF, 66KB) |
B |
AUG 12 |
| SD‑112 |
SEMI MOUNTABLE KERB & GUTTER — INFALL TYPE (SK&G)(PDF, 69KB) |
B |
AUG 12 |
| SD‑113 |
SEMI MOUNTABLE KERB & TRAY — OUTFALL TYPE (SK&T)(PDF, 69KB) |
B |
AUG 12 |
| SD‑114 |
SEMI MOUNTABLE KERB — (SK)(PDF, 67KB) |
B |
AUG 12 |
| SD‑115 |
LOW PROFILE ROUNDABOUT KERB — (RAB)(PDF, 126KB) |
D |
FEB 18 |
| SD‑116 |
900mm SPOON DRAIN - RESIDENTIAL & INDUSTRIAL (SD)(PDF, 122KB) |
A |
JUN 13 |
| SD‑117 |
1200mm SPOON DRAIN - RESIDENTIAL & INDUSTRIAL (SD)(PDF, 123KB) |
A |
JUN 13 |
Typical drainage details (200 series)
| DWG# |
Drawing title |
Rev |
Date |
| SD‑200 |
JUNCTION BOX (TYPE 1) — FOR PIPE SIZES ≤ ∅1050mm(PDF, 181KB) |
C |
FEB 18 |
| SD‑201 |
JUNCTION BOX (TYPE 2) — FOR PIPE SIZES > ∅1050mm(PDF, 189KB) |
D |
FEB 18 |
| SD‑202 |
GRATED INLET PIT (TYPE 1) — FOR PIPE SIZES ≤ ∅450mm(PDF, 177KB) |
C |
FEB 18 |
| SD‑203 |
GRATED INLET PIT (TYPE 2) — FOR PIPE SIZES ≤ ∅1050mm(PDF, 180KB) |
C |
FEB 18 |
| SD‑204 |
SADDLE PIT — FOR SMALL TO LARGE PIPE CONNECTION — WHERE LARGE PIPE SIZE ≥ ∅1050mm(PDF, 179KB) |
C |
FEB 18 |
| SD‑205 |
FIELD GULLY — WITH 600mm CONCRETE APRON(PDF, 176KB) |
C |
FEB 18 |
| SD‑206 |
DOUBLE SIDE ENTRY PIT (TYPE 1) — LINTEL TYPE — WITHOUT DEFLECTORS(PDF, 180KB) |
D |
FEB 18 |
| SD‑207 |
DOUBLE SIDE ENTRY PIT (TYPE 2) — LINTEL TYPE — WITH DEFLECTORS(PDF, 184KB) |
D |
FEB 18 |
| SD‑208 |
DOUBLE SIDE ENTRY PIT (TYPE 3) — COVER & FRAME TYPE — WITHOUT DEFLECTORS(PDF, 185KB) |
D |
FEB 18 |
| SD‑209 |
DOUBLE SIDE ENTRY PIT (TYPE 4) — COVER & FRAME TYPE — WITH DEFLECTORS(PDF, 187KB) |
D |
FEB 18 |
| SD‑210 |
PIT BENCHING (STREAMLINING) — TO BE USED FOR ALL DRAINAGE PITS(PDF, 145KB) |
C |
FEB 18 |
| SD‑211 |
‘CONFINED SPACE' WARNING SIGN — FOR ALL NEW DRAINAGE PITS(PDF, 142KB) |
B |
AUG 12 |
| SD‑212 |
BANDAGE JOINT — FOR CONCRETE PIPES(PDF, 170KB) |
C |
FEB 18 |
| SD‑213 |
DRAINAGE OUTLET TO KERB(PDF, 184KB) |
C |
FEB 18 |
| SD‑214 |
DRAINAGE CROSSOVER (TYPE 1) — ALUMINIUM 'TOP HAT' SECTION(PDF, 135KB) |
B |
AUG 12 |
| SD‑215 |
DRAINAGE CROSSOVER (TYPE 2) — STEEL 'BOX DRAIN'(PDF, 137KB) |
B |
AUG 12 |
| SD‑216 |
STEP IRON DETAILS — FOR DRAINAGE PITS > 1.2m DEEP(PDF, 291KB) |
A |
AUG 12 |
| SD‑220 |
ALLOTMENT CONNECTION (TYPE 1) TO REAR OF ALLOTMENT DRAIN — CONCRETE INSPECTION POINT COVER & SURROUND(PDF, 141KB) |
D |
FEB 18 |
| SD‑221 |
ALLOTMENT CONNECTION (TYPE 2) TO REAR OF ALLOTMENT DRAIN — CONCRETE ALLOTMENT COLLECTION SLAB & PVC GRATE(PDF, 155KB) |
D |
FEB 18 |
| SD‑222 |
ALLOTMENT CONNECTION (TYPE 3) TO FRONT OF ALLOTMENT DRAIN — CONCRETE INSPECTION POINT COVER & SURROUND(PDF, 141KB) |
D |
FEB 18 |
| SD‑223 |
ALLOTMENT CONNECTION TO DRAIN — TO RCP OR FRCP ALLOTMENT DRAIN – FOR FRONT OR REAR OF ALLOTMENT DRAIN CONNECTIONS(PDF, 141KB) |
B |
AUG 12 |
| SD‑230 |
SWALE INSTALLATION (TYPE 1) — 900mm ROCK LINED SWALE(PDF, 76KB) |
B |
AUG 12 |
| SD‑231 |
SWALE INSTALLATION (TYPE 2) — AT DRIVEWAY CROSSOVERS — CEMENT TREATED(PDF, 131KB) |
C |
FEB 18 |
Typical path details (300 series)
| DWG# |
Drawing title |
Rev |
Date |
| SD‑300 |
BLOCK PAVED FOOTPATH — (RESIDENTIAL)(PDF, 143KB) |
E |
FEB 18 |
| SD‑301 |
BLOCK PAVED FOOTPATH — (INDUSTRIAL)(PDF, 149KB) |
E |
FEB 18 |
| SD‑302 |
CONCRETE FOOTPATH — (RESIDENTIAL)(PDF, 213KB) |
E |
FEB 18 |
| SD‑303 |
CONCRETE FOOTPATH — (INDUSTRIAL)(PDF, 218KB) |
E |
FEB 18 |
| SD‑304 |
FOOTPATH & RETAINING WALL — RETAINING WALL ADJACENT FOOTPATH(PDF, 187KB) |
B |
AUG 12 |
| SD‑305 |
ASPHALT FOOTPATH — (RESIDENTIAL)(PDF, 142KB) |
B |
FEB 18 |
| SD‑306 |
ASPHALT FOOTPATH — (INDUSTRIAL)(PDF, 146KB) |
B |
FEB 18 |
| SD‑307 |
EXPOSED AGGREGATE FOOTPATH — (RESIDENTIAL)(PDF, 216KB) |
B |
FEB 18 |
| SD‑308 |
EXPOSED AGGREGATE FOOTPATH — (INDUSTRIAL)(PDF, 222KB) |
B |
FEB 18 |
| SD‑309 |
PERMEABLE PAVED FOOTPATH - (RESIDENTIAL)(PDF, 143KB) |
A |
FEB 18 |
| SD‑310 |
CONCRETE SHARED PATH(PDF, 213KB) |
D |
FEB 18 |
| SD‑311 |
BLOCK PAVED SHARED PATH(PDF, 141KB) |
D |
FEB 18 |
| SD‑312 |
SPRAY SEAL SHARED PATH (TYPE 1) — WITHOUT GEOGRID(PDF, 136KB) |
D |
FEB 18 |
| SD‑313 |
SPRAY SEAL SHARED PATH (TYPE 2) — WITH 'TENSAR SS30' GEOGRID(PDF, 137KB) |
D |
FEB 18 |
| SD‑314 |
ASPHALT SHARED PATH (TYPE 1) — WITHOUT GEOGRID(PDF, 136KB) |
D |
FEB 18 |
| SD‑315 |
ASPHALT SHARED PATH (TYPE 2) — WITH 'TENSAR SS30' GEOGRID(PDF, 138KB) |
D |
FEB 18 |
| SD‑316 |
CEMENT TREATED RUBBLE SHARED PATH(PDF, 142KB) |
D |
FEB 18 |
| SD‑317 |
LIMESTONE RUBBLE SHARED PATH(PDF, 221KB) |
B |
AUG 12 |
| SD‑320 |
KERB RAMP (TYPE 1) - FOR KERB RAMP WITH WINGS(PDF, 187KB) |
D |
FEB 18 |
| SD‑322 |
KERB RAMP (TYPE 2) - FOR KERB RAMP WITH PLINTHS(PDF, 183KB) |
A |
FEB 18 |
| SD‑325 |
FOOTPATH HOLDING RAIL INSTALLATION — AT KERB RAMP FOR PEDESTRIANS(PDF, 139KB) |
C |
FEB 18 |
| SD‑326 |
SHARED PATH HOLDING RAIL INSTALLATION — AT KERB RAMP FOR PEDESTRIANS & CYCLISTS(PDF, 138KB) |
C |
FEB 18 |
| SD‑327 |
PEDESTRIAN REFUGE(PDF, 180KB) |
C |
FEB 18 |
| SD‑330 |
LOCALISED FOOTPATH WIDENING — TO ALLOW FOR BIN PLACEMENT(PDF, 131KB) |
D |
FEB 18 |
| SD‑331 |
CONCRETE INFILL FOR SERVICE COVERS — FOR BLOCK PAVING(PDF, 76KB) |
B |
AUG 12 |
| SD‑332 |
EDGE FOOTING INSTALLATION — INTERFACE BETWEEN PAVING & LANDSCAPED AREAS(PDF, 143KB) |
D |
FEB 18 |
| SD‑340 |
CONCRETE FOOTPATH REPAIR - (RESIDENTIAL)(PDF, 230KB) |
A |
FEB 18 |
Typical installation details (400 series)
| DWG# |
Drawing title |
Rev |
Date |
| SD‑400 |
KERB INSTALLATION (TYPE 1) — IN NEW PAVEMENT — WITH FUTURE VERGE TREATMENT(PDF, 135KB) |
D |
FEB 18 |
| SD‑401 |
KERB INSTALLATION (TYPE 2) — IN NEW PAVEMENT — WITH FOOTPATH BEHIND KERB(PDF, 134KB) |
D |
FEB 18 |
| SD‑402 |
KERB INSTALLATION (TYPE 3) — IN EXISTING PAVEMENT(PDF, 174KB) |
D |
FEB 18 |
| SD‑403 |
KERB INSTALLATION (TYPE 4) — IN EXISTING PAVEMENT WITH 'CLSM' INFILL(PDF, 174KB) |
D |
FEB 18 |
| SD‑404 |
KERB INSTALLATION (TYPE 5) — HOTMIX KERBING FOR TREE IN CLOSE PROXIMITY — IN EXISTING PAVEMENT(PDF, 207KB) |
B |
FEB 18 |
| SD‑405 |
SIT-ON KERB INSTALLATION (TYPE 1) — IN NEW PAVEMENT(PDF, 137KB) |
C |
FEB 18 |
| SD‑406 |
SIT-ON KERB INSTALLATION (TYPE 2) — IN EXISTING PAVEMENT(PDF, 139KB) |
C |
FEB 18 |
| SD‑407 |
KEYED-IN KERB INSTALLATION (TYPE 1) – IN NEW PAVEMENT(PDF, 137KB) |
C |
FEB 18 |
| SD‑408 |
KEYED-IN KERB INSTALLATION (TYPE 2) — IN EXISTING PAVEMENT(PDF, 139KB) |
C |
FEB 18 |
| SD‑410 |
300mm CONCRETE FILLET AT KERB RADIUS' — FOR USE WHERE SPOON DRAIN OR EDGE STRIP IS USED(PDF, 137KB) |
C |
FEB 18 |
| SD‑411 |
CONCRETE APRON INSTALLATION — TO DIRECT STORMWATER FLOWS AT INTERSECTION(PDF, 68KB) |
B |
AUG 12 |
| SD‑420 |
DRIVEWAY INVERT & CROSSOVER INSTALLATION (RESIDENTIAL) DRIVEWAY INVERT FOR 150 UPRIGHT KERB PROFILE(PDF, 225KB) |
D |
FEB 18 |
| SD‑421 |
DRIVEWAY INVERT & CROSSOVER INSTALLATION (INDUSTRIAL) DRIVEWAY INVERT FOR 150 UPRIGHT KERB PROFILE(PDF, 226KB) |
D |
FEB 18 |
| SD‑422 |
DRIVEWAY INVERT (RESIDENTIAL & INDUSTRIAL) DRIVEWAY INVERT FOR 150 UPRIGHT KERB PROFILE(PDF, 169KB) |
D |
FEB 18 |
| SD‑423 |
DRIVEWAY INVERT INSTALLATION (RESIDENTIAL & INDUSTRIAL) REPLACEMENT OF EXISTING KERBING(PDF, 218KB) |
B |
FEB 18 |
| SD‑430 |
PAVEMENT REINSTATEMENT FOR TRENCHES & REPAIRS (TYPE 1) FOR LOCAL ROADS(PDF, 140KB) |
E |
FEB 18 |
| SD‑431 |
PAVEMENT REINSTATEMENT FOR TRENCHES & REPAIRS (TYPE 2) FOR COLLECTOR & DISTRIBUTOR ROADS(PDF, 143KB) |
E |
FEB 18 |
| SD‑432 |
DRAINAGE TRENCH BACKFILLING — BELOW SUB-BASE LEVEL FOR PIPE SIZES ≤ ∅1500mm(PDF, 218KB) |
D |
AUG 12 |
| SD‑433 |
SERVICE TRENCH BACKFILLING — BELOW SUB-BASE LEVEL FOR CONDUITS OR SERVICES(PDF, 110KB) |
D |
AUG 12 |
| SD‑440 |
MEDIAN ISLAND KERB INSTALLATION (TYPE 1) CONTROLLED LOW STRENGTH MATERIAL (CLSM) INFILL(PDF, 76KB) |
B |
AUG 12 |
| SD‑441 |
MEDIAN ISLAND KERB INSTALLATION (TYPE 2) — PATTERN FINISH CONCRETE INFILL(PDF, 71KB) |
B |
AUG 12 |
| SD‑442 |
SPLITTER ISLAND INSTALLATION (TYPE 1) — BACK TO BACK SIT-ON KERB(PDF, 68KB) |
B |
AUG 12 |
| SD‑445 |
MEDIAN ISLAND KERB INSTALLATION (TYPE 3) CONTROLLED LOW STRENGTH MATERIAL (CLSM) INFILL(PDF, 77KB) |
B |
AUG 12 |
| SD‑446 |
MEDIAN ISLAND KERB INSTALLATION (TYPE 4) — PATTERN FINISH CONCRETE INFILL(PDF, 71KB) |
B |
AUG 12 |
| SD‑447 |
SPLITTER ISLAND INSTALLATION (TYPE 2) — BACK TO BACK KEYED-IN KERB(PDF, 68KB) |
B |
AUG 12 |
| SD‑450 |
ROUNDABOUT INSTALLATION (TYPE 1) WITH MOUNTABLE ISLAND AND LANDSCAPED CENTER ISLAND(PDF, 153KB) |
C |
FEB 18 |
| SD‑451 |
ROUNDABOUT INSTALLATION (TYPE 2) — PATTERN FINISH CONCRETE INFILL(PDF, 144KB) |
C |
FEB 18 |
| SD‑460 |
SPOON DRAIN INSTALLATION (TYPE 1) — IN NEW PAVEMENT(PDF, 71KB) |
A |
AUG 12 |
| SD‑461 |
SPOON DRAIN INSTALLATION (TYPE 2) — IN EXISTING PAVEMENT(PDF, 172KB) |
B |
FEB 18 |
| SD‑462 |
SPOON DRAIN INSTALLATION (TYPE 3) — IN EXISTING PAVEMENT WITH 'CLSM' INFILL(PDF, 171KB) |
B |
FEB 18 |
Typical landscaping details (600 series)